PROTECTOR
Radio exhaust air control AS 7030
Article-No: 441830

PROTECTOR radio exhaust air control AS 7030

exhaust air control
for monitoring the fresh air supply when starting up an exhaust air device e.g. B. Extractor hood and simultaneous operation of an oil, wood, coal stove or gas boiler, only allows the exhaust air device to be switched on with the window or door open to prevent dangerous gases from being sucked back from the fireplace
Plug - Control receiver with plug-in fuse, optical and acoustic error message, test switching function and monitoring LEDs, wireless window contact with battery control, monitoring LEDs and reed contact, battery operation 1x CR2477, H30xW70xD20mm, wireless thermal sensor with connecting cable length 2m for the stove pipe which determines the exhaust gas temperature of the fireplace monitored, at a temperature higher than 38 ° C it switches off the exhaust air device - the exhaust air device can be enabled both by the wireless window contact (when the window is opened) and by the wireless thermal sensor (when the fireplace is not in operation), including button cell 1x CR2477 and brown interchangeable housing for radio window contact, radio frequency 868 MHz, Reic Distance approx. 50m, the system can be used with the additional transmitters, item no. 441 840 wireless window contact and 441 860 roller shutter transmitter (for switching in individual or series operation) can be expanded to a maximum of 16 transmitters, DIBT approval
Technical data
EAN: 4260070567032
Product group: Fans and accessories
Manufacturer: PROTECTOR
Supplier item number: 41033
Color: white
Design: Wireless
Contact: Thermal contact
Switching contact: Normally open contact
Power : 230V/1800W
Frequency range: 868 MHz